Antiviral Cloth Masks
Light & Safe
UNIQUE WITH PERMANENT ANTIVIRAL EFFECT
Certified by the Belgian Solvay Group
made with Amni® Virus-Bac OFF yarn
INACTIVATES VIRUS IN LESS THAN A MINUTE
Antiviral and Antimicrobial Effect, does not deteriorate with washing and protects disposable masks
ISO 18184-2019 and AATCC100 certifications
Antiviral Light & Safe fabric masks
Royalty Safe masks are made with the permanent action technology of the Belgian group Solvay . They do not deteriorate with washing. They were developed to combat contagion by cross contamination, effectively preventing the proliferation of bacteria and the transmission of viruses, thanks to the Rhodia Amni® Virus-Bac OFF polyamide thread. It contains an antiviral and antibacterial agent inserted into the polymeric matrix of the thread, which deactivates the virus in one minute, offering protection, comfort and well-being, an action that will remain active throughout the useful life of the piece.
The Antiviral efficacy of Amni® polyamide was verified and certified by ISO 18184-2019 (Determination of Antiviral Textile Products) and the Antimicrobial action was verified according to the international textile standards AATCC100.
Composition: 90% Amni® polyamide and 10% elastane.
It is a very cool mask to use, especially when walking and exercising. It should be used to complement disposable masks, providing an antiviral layer that prevents contamination of them. Remember that cross contamination, as studies say, represents more than 80% of infections and this occurs when you touch contaminated surfaces with your hands and then touch your face.
How to put on the mask:
The mask is individual and should not be shared with anyone, not even family members. We know that unconsciously we tend to accommodate our masks and this can contaminate them, for this an antiviral fabric mask is the best solution.
Before putting on the mask for the first time, you should wash it with soap and water and wait for it to dry before using it. To put it on, wash your hands thoroughly with soap and water for at least 20 seconds, then stretch and carefully put the mask on, covering your mouth and nose, snugly tucking it in to minimize the gaps between your face and the mask.
How to remove the mask:
Step 1 - When removing the mask, you must have clean hands, to perform the washing procedure remember to use soap and water for at least 20 seconds. Then take it by the side loop next to your ear.
Step 2 - Place the used mask in the plastic bag and set it aside,
Step 3 - Remember to wash your face well.
- Wash the mask whenever there is dirt or moisture.
- Discard the mask whenever it shows signs of deterioration or impaired functionality.
- The continuous use of high concentrations of chlorine during washing can change the color of the product, however, its functions remain unchanged.
- The use of the mask is one more protection measure; The other measures recommended by the Ministry of Health should not be neglected.
Mask washing and cleaning:
Step 1 - When you get home, if the mask is dirty, wash it with a solution of drinking water and liquid detergent in the proportion of 5ml of detergent per 1 liter of water and let them soak for 30 minutes. After the immersion time, rinse with water.
Step 2 - Let it dry in the shade.
Step 3 - After drying, place it in its plastic bag, so that it does not get dirty until use.
Remember that the mask must be very dry to be able to reuse it.
You should know that this is not a Hospital level mask. If you go to crowded or contaminated places, we recommend using it on top of a disposable mask, wearing a face shield and also always keeping a distance of 2 meters. of the other people.
To certify that the mask is manufactured with Solvay's Amni ® yarn, scan the QR code printed on the packaging and review the certification and the effectiveness test performed by an independent laboratory.